HPE Community
BladeSystem - General
1752780 Members
6254 Online
108789 Solutions
New Discussion

C7000 + Sb40c + share with two servers

 
SOLVED
Go to solution
Joao_Santos
Occasional Contributor

‎04-04-2016 10:32 AM

‎04-04-2016 10:32 AM

C7000 + Sb40c + share with two servers

Hello. I'm newbie with blade and need your help.

 

I've bought a Blade C7000 with 4 Servers BL460C, two server i've installed OS and it's working good, The other two server I added on SB40c and I would like to have A Hyper-v Cluster, My problem , where I attach Storage To respective server Or If I want attach storage to BladeServer in Position 1 how can I select?

 

http://s22.postimg.org/j3wsnd8ep/Blade.jpg

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎04-04-2016 11:19 AM

‎04-04-2016 11:19 AM

Solution

Re: C7000 + Sb40c + share with two servers

The storage blade is hard wired to the neighbor slot, it cannot be shared between servers. You need either external storage (e.g. MSA2040) or virtual storage like VSA.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Joao_Santos
Occasional Contributor

‎04-05-2016 09:44 AM

‎04-05-2016 09:44 AM

Re: C7000 + Sb40c + share with two servers

So if I want connect with blade01 I need to put slot2

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.