BladeSystem - General
1748137 Members
3565 Online
108758 Solutions
New Discussion юеВ

C7000 - Virtual Connect 4Gb FC Firmware upgrade

 
Anthony Elizondo
New Member

C7000 - Virtual Connect 4Gb FC Firmware upgrade

I used vcutil to upgrade the firmware on my HP Virtual Connect 4Gb FC module, from 1.40 to 1.41

The CLI reports 1.41:

->show firmware
=====================================================================
ID Enclosure Bay Type Firmware Version Status
=====================================================================
enc0:1 USE919M4N0 1 VC-ENET 3.10 2010-09-03T06:16:45Z OK
enc0:2 USE919M4N0 2 VC-ENET 3.10 2010-09-03T06:16:45Z OK
enc0:3 USE919M4N0 3 VC-FC 1.41 7.12.4.11 OK
enc0:4 USE919M4N0 4 VC-FC 1.41 7.12.4.11 OK

but the GUI reports it is still on version 1.40.

Which is correct?
6 REPLIES 6
kris rombauts
Honored Contributor

Re: C7000 - Virtual Connect 4Gb FC Firmware upgrade

Anthony,

just fyi

i went thru the same kind of VC FWupgrade and the GUI in the OA shows the correct versions after the update.
To me your VC CLI is correct.

I had a GUI open to the OA open during the VC FW upgrade from 3.01 to 3.10 (VC Ethernet) and 1.40 to 1.41 (VC SAN).


My OA is on FW V3.11, not sure if this makes a difference or not. I did not had to log out/login again to the OA GUI to see the newer VC FW versions, it updated automatically. The VC GUI also shows the right versions.




The following modules will be updated:

==============================================================================
Enclosure Bay Module Current Version New Version
==============================================================================
CZC8085HTT 1 HP VC Flex-10 3.01 3.10
Enet Module 2010-06-03T09:50:38Z 2010-09-03T06:16:45Z
------------------------------------------------------------------------------
CZC8085HTT 2 HP VC Flex-10 3.01 3.10
Enet Module 2010-06-03T09:50:38Z 2010-09-03T06:16:45Z
------------------------------------------------------------------------------
CZC8085HTT 3 HP VC 8Gb 1.40 7.12.4.06 1.41 7.12.4.11
20-Port FC
Module
------------------------------------------------------------------------------
CZC8085HTT 4 HP VC 8Gb 1.40 7.12.4.06 1.41 7.12.4.11
20-Port FC
Module
------------------------------------------------------------------------------


...



The following modules were updated successfully:
=========================================================================
Enclosure Bay Module New Version
=========================================================================
CZC8085HTT 1 HP VC Flex-10 Enet Module 3.10 2010-09-03T06:16:45Z
CZC8085HTT 2 HP VC Flex-10 Enet Module 3.10 2010-09-03T06:16:45Z
CZC8085HTT 3 HP VC 8Gb 20-Port FC Module 1.41 7.12.4.11
CZC8085HTT 4 HP VC 8Gb 20-Port FC Module 1.41 7.12.4.11

------------------------------------------------------------------------------
SUCCESS: All firmware update operations completed successfully




kris rombauts
Honored Contributor

Re: C7000 - Virtual Connect 4Gb FC Firmware upgrade

Did the same upgrade on another enclosure and OA GUI also shows properly the new versions. OA here was also V3.10

Used V1.50 of the VC utility in previous upgrade and now i used V1.51, all went well apparently.

Try to log off from your OA GUI session, clear cache eventually and log on again.
But your update looks fine to me.


HTH

Kris
Anthony Elizondo
New Member

Re: C7000 - Virtual Connect 4Gb FC Firmware upgrade

I logged off from OA, no change. I cleared cache, no change.

However, I seem to have fixed the issue by forcing a active-to-standby OA switch. Now, OA shows 1.41 for FC firmware.
MAH_2
Regular Advisor

Re: C7000 - Virtual Connect 4Gb FC Firmware upgrade

Hi I am facing the problem with firware upgrade of VCFC8Gb 20port.
It is failing.
Ethenrent module (Flex 10)updated.
AG Insurance
Visitor

Re: C7000 - Virtual Connect 4Gb FC Firmware upgrade

Where can i find 1.41
It is not in the VCM 3.10 package
vcfwall301.bin
Anthony Elizondo
New Member

Re: C7000 - Virtual Connect 4Gb FC Firmware upgrade

it is in 3.10 of virtual connect firmware. the filename is going to be vcfwall310.bin