Can a 3 phase c7000 be converted to single phase power?

[Brandon Feemster]

I have a 3 phase c7000 enclosure and want to see if it can be converted to single phase. All of the documentation for the c7000 seem to show that everything (part #s) between the 3 phase and the single phase enclosure are the same, with the exception of the power module that holds the power supplies.

I can order the single phase power module and swap them out, but is that all there is to it?

The single phase power module part number is: 413379-B21

Thanks,

[Raghuarch]

Hi Brandon,

yes you can swap them thats all you need to Do. There are no additional parts needed.

You have mentioned the part number of the module as 413379-B21, i think this is wrong.

Please visit the below link, In Page 24 they mention a different part number.
The Correct part Number of the device is 413494-001.

Do verify the same.
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00714237/c00714237.pdf?jumpid=reg_R1002_USEN


Regards,
Raghuarch

[Brandon Feemster]

Great news! Thanks Raghuarch for your help.

[Blazhev_1]

Hi,

Both numbers are for the same part.
413379-B21 is the optional, with it you can order, the other one is the spare with it you can replace old one.
You can check it at www.partsurfer.hp.com

Regards,

Pac