BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Connecting C7000 Enclosure to Onboard admin and Upgrading Firmware

 
Highlighted
Honored Contributor

Re: Connecting C7000 Enclosure to Onboard admin and Upgrading Firmware

The latest OA FW is 2.60. Follow the link on the left (Download drivers, software and firmware.). Select c7000 blade enclosure.

Dave.
Highlighted
Honored Contributor

Re: Connecting C7000 Enclosure to Onboard admin and Upgrading Firmware

You should also think about assigning points if the answers above have been helpful.

Dave
Trusted Contributor

Re: Connecting C7000 Enclosure to Onboard admin and Upgrading Firmware

You'll also want to upgrade any virtual connect modules you have in the enclosure.

Also, make sure you upgrade the BIOS on the blades, the ILOs on the blades and power management firmware on the blades (if applicable).
Highlighted
New Member

Re: Connecting C7000 Enclosure to Onboard admin and Upgrading Firmware

Hi All,

All power supply (6 hot plug) coming up as critical after the upgrade. I have taken them all out 1by1 and also replace with a working enclosure (non patched enclosure) and still coming up as critical. This was not the case before the upgrade, anyone experience similar thing or can help

Thanks
Highlighted
Trusted Contributor

Re: Connecting C7000 Enclosure to Onboard admin and Upgrading Firmware

How old are these enclosures? HP put out a recall on the power supplies (unfortunately, the details are escaping me) made before a certain date. Newer OA firmware has been detecting and flagging them. You might need to get in touch with HP and have them replaced.
Highlighted
Honored Contributor

Re: Connecting C7000 Enclosure to Onboard admin and Upgrading Firmware