Degraded Status in bay ##

[Aniketroo]

I have a degraded status warning in one of my enclosure bays, but no visible failures. Is there a log to get more info, or a process to clear the error, what would the impact be to the OS running on the blade??

[Igor Karasik · Accepted solution]

You can check blade status in HP system management homepage (in OS)
Most likely you will detect iLO is degraded , and iLO reset will solve problem. You can do iLO reset from HP system management homepage->Management processor or from Onboard administrator->Blade->Web administration->Diagnostics->Reset iLO

[Aniketroo]

Thanks that was it. I reset the iLo2 and the error was cleared. Thanks for your help!!

[Marconi Poveda]

Unfortunately it didn't work in my case.  The error says:

"A device is degraded for internal reasons. Check your iLO2 Log for any specific indication and replace or reseat Memory/CPU components if applicable"

I found something about PSP on Linux/VMWare hosts[1] . I'll let you know.

[1]http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01734846&jumpid=reg_R1002_USEN