Dertermining existing Firmware version BL -P class chassis

[John Korschot]

Guy that set up the blades here left. I inherited 5 sets of enclosures in a variety of conditions.
Some are talking correctly, some not. I have most ILO's working but not all.
Opening the ILO and rack view several sets of chassis can not view the other enclosure within the group, reports topology is incorrect, other ilo may be viewing, or that a minimum firmware of 2.1 req.
I've already swapped the communication cables from working chassis and the ones that work still work, the ones that don't still don't.
Before I start updating firmware, how do I determine what the firmware is before moving ahead.
Thanks
John

[Víctor Cespón · Accepted solution]

In BL p-Class - Rack view, if you click on one enclosure, there's a link on the border, that should display enclosure info on the right, including management module firmware.