Fabric login fails for BL490c on Virtual Connect

[Simon_Geary]

Hi, I have two C7000s with FC Virtual Connect which are working fine with other blades. I've added a new BL490c in to each chassis and cannot get either blade to log on to the fabric. QLogic QMH2462 is the HBA. VC manager says the HBA is 'NOT-LOGGED-IN' and the Brocade switch doesn't list the VC assigned WWN in the name table. Can anyone help with this, or know how to go about troubleshooting? I've tried the blades in different slots and so far as I can tell the server profile seems correct. Thanks.

[The Brit]

Just a thought, check that the SAN Switch ports have NPIV enabled.

Dave.

[Simon_Geary]

This was fixed by upgrading the VC FC firmware to version 1.32.