BladeSystem - General
1748123 Members
3348 Online
108758 Solutions
New Discussion юеВ

Firmware update on Virtual connect or On Board Administrator first?

 
SOLVED
Go to solution

Firmware update on Virtual connect or On Board Administrator first?

Hi,

I have upgraded my BL465c G5 servers with firmware CD 8.70.

I have OBA 2.51, VC-Enet 2.10 and VC-FC 1.32.

I called HP support and the OA department is telling me to upgrade the OA last. The Virtual Connect department is asking me to upgrade the OA first so the features in VC firmware update will be recognized.

Does anyone know which is the proper way to do this? I searched other threads and there doesn't seem to be a strong consensus on which firmware to apply first.

Thanks in advance!
3 REPLIES 3
Michal Kapalka (mikap)
Honored Contributor

Re: Firmware update on Virtual connect or On Board Administrator first?

hi,

check this links from ITRC :

"new way of updating blade enclosures ??"

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1410858

"Firmware Updates - Best Practices"

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1379639

mikap
JKytsi
Honored Contributor
Solution

Re: Firmware update on Virtual connect or On Board Administrator first?

I have done it both ways, works.

But if I must choose, I'll go with OA (and ILOs) first line.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi

Re: Firmware update on Virtual connect or On Board Administrator first?

Hi,
Just want to let you guys know that I upgraded the OA first and then virtual connects.

I did not run into any problems going this route first.