Flex10 - "Management Processor Failed"

[The Brit]

Just grasping at straws. If removing and reseating the module does not resolve this, are there any other suggestions???

Dave.

[Antonio Milanese]

Hi,

Which OA/ILO fw levels?

If you have cli access to OA(s) try to reset ILOs first and then reset OA again and/or force a takeover to secondary one.

Regards,

Antonio

[The Brit]

Thanks for the reply, however the issue is with the Flex10 VC module. OA's are fine.

[The Brit]

Fixed the problem by removing and re-inserting the problem module. Module reboot took about 1 minute, however Domain took about 10 minutes to normalize.

I say this as a "headsup". Logging in is very very slow until the Domain is happy.

Dave.

[Zygmunt Krawczyk]

OA firmware level is important. If you have OA fw level less than 3.21, you need to update it first.