BladeSystem - General
1752806 Members
5637 Online
108789 Solutions
New Discussion юеВ

Frimware upgrade in bl860c i2( offline)

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

Re: Frimware upgrade in bl860c i2( offline)

Simply put the "manual" version to an USB thumb drive or map it via virtual media and do the firmware update. Then you can switch from "plain" disks to RAID1.
I think you will loose the data on the disks, at least this happens on the first generation of the BL8x0c blades.

The OS based firmware packet does almost the same, but you need hp-ux running in order to ungzip,unshar it and install with swinstall.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
WW393114
Advisor

Re: Frimware upgrade in bl860c i2( offline)

Hello Friends i have tried all the methods but its not working.. i am unable to update the sas driver
Torsten.
Acclaimed Contributor
Solution

Re: Frimware upgrade in bl860c i2( offline)

What is "not working"?

Any details, screen captures, error messages, etc?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!