BladeSystem - General
1748181 Members
4175 Online
108759 Solutions
New Discussion юеВ

Re: GbE2c Layer 2/3 no management IP

 

GbE2c Layer 2/3 no management IP

hello,

I have six GbE2c, one of them never had IP address.
I try to unplug it end replug, without success.
I try to set an IP address in Enclosure Bay IP Addressing, without success too.

Is someone has a solution?

Thank you ;-)
13 REPLIES 13
gregersenj
Honored Contributor

Re: GbE2c Layer 2/3 no management IP

If you can't get it to pickup tge IP from the EBIPA, then you cna set it via the serial port.

Read all of the installation chapter:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00701541/c00701541.pdf

Page 20 for the serial connection.

BR
/jag

Accept or Kudo

Re: GbE2c Layer 2/3 no management IP

Thank you, but why this switch doesn't obtain an IP address?
gregersenj
Honored Contributor

Re: GbE2c Layer 2/3 no management IP

Can't really tell.

But there's been some issues (If I remember correctly), with interconnect modules not being set for DHCP / bootp from factory.

And still some modules, get the IP, but doesn't report to the OA.

BR
/jag

Accept or Kudo

Re: GbE2c Layer 2/3 no management IP

Thank you, i'm trying with serial port.
gregersenj
Honored Contributor

Re: GbE2c Layer 2/3 no management IP

You are welcome.

Good luck.

BR
/jag

Accept or Kudo

Re: GbE2c Layer 2/3 no management IP

Here is its configuration, the IP address is good ... don't know why i can't access by network.
gregersenj
Honored Contributor

Re: GbE2c Layer 2/3 no management IP

I don't believe I can be of more help to you, due to lack of knowledge on my part.

BR
/jag

Accept or Kudo

Re: GbE2c Layer 2/3 no management IP

No pb gregersenj ;-)
Henry A.C. Jansen
Trusted Contributor

Re: GbE2c Layer 2/3 no management IP

Hi Siegfried,

You should set the management IP adres on these switches on interface 256 (management VLAN 4095) disable bootp and dhcp and all will do... do this via serialport..