HPE Community
BladeSystem - General
1752608 Members
4528 Online
108788 Solutions
New Discussion юеВ

Re: How many networks can be configured on a BL460c G6 blade?

 
heavy312
New Member

тАО08-09-2013 08:10 AM

тАО08-09-2013 08:10 AM

How many networks can be configured on a BL460c G6 blade?

It will be in the BladeSystem with 2 Flex-10 Virtual Connect modules

0 Kudos
Reply
2 REPLIES 2
Psychonaut
Respected Contributor

тАО08-13-2013 02:31 PM

тАО08-13-2013 02:31 PM

Re: How many networks can be configured on a BL460c G6 blade?

With FlexLOM's you will have up to 8 flex NICs.  Keep in mind you can only use the same VLAN once per physical LOM.  So if you have VLAN1 you can use it once on connections 1-4 and once on connections 5-8.

0 Kudos
Reply
Casper42
Respected Contributor

тАО08-31-2013 12:44 AM

тАО08-31-2013 12:44 AM

Re: How many networks can be configured on a BL460c G6 blade?

Slight correction. Port 1 will be NICs 1/3/5/7 in the VC Server Profile. Port 2 will be 2/4/6/8
So you can only use that VLAN once on Odd NICs and once on Even NICs which is still Once per Port as Psycho mentioned.
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.