BladeSystem - General
1748054 Members
4973 Online
108758 Solutions
New Discussion

Re: how to disable uplink ports in GbE2c switch

 
SOLVED
Go to solution
BALAJI_16
Advisor

how to disable uplink ports in GbE2c switch

Hi,
Can any one tell me how to disable uplink ports in GbE2c switch when in Gbe2c switch i connected one uplink port to my network rest of four not connected here i'm facing 2 blades were not connecting to my network some few hours ago its working .no settings made in gbe2c.if i connect all the uplink ports to my network means its work

help me
1 REPLY 1
Gary Benavides Meza
Trusted Contributor
Solution

Re: how to disable uplink ports in GbE2c switch

Use port mapping in the OA to know what port you want to disable.
First connect to switch via serial port and use hyper terminal or alernatively, if you are connected to OA command line use
Connect Interconnect Command.

For a GBE2c:

1) /c/port x/dis
2) apply (the port will be disabled
3) /c/port x/ena (to re-enable)
4) apply