BladeSystem - General
1748170 Members
4013 Online
108758 Solutions
New Discussion

How to setup the link aggregation (port trunking) for NIC's for BL460c blades

 
Jatender Dhillon
Occasional Visitor

How to setup the link aggregation (port trunking) for NIC's for BL460c blades

We have backup media servers with very high utilization of network bandwidth, I tried using the NIC teaming with Switch assisted (SLB) and 802.3ad but it does not seem to work properly. When selecting automatic it will do only NFT and link aggregation on send only.

If anyone is using or tried the LACP on the blades please advise.