HP Best practice in deploying and configuring Proliant Blade server system

[Server-Support]

Hi Folks,

Is there any documentation from HP which shows the steps by steps or guidelines in how to configure and setup Proliant Blade system with C7000 enclosure and the mostly hard to understand Virtual Connect modules ?

Please let me know where to get that from.

Thanks

[RbBsmn]

Check out below link and let me know if this is what you are looking for:

http://h17007.www1.hp.com/ie/en/enterprise/servers/bladesystem/virtual-connect/index.aspx#tab=TAB3

If you are looking for any specific information, please post it here and I'll try to help out.

[Server-Support]

Hi RbBsmn,

What I'm after is more like a step by steps guide in how to provision the HP Blades server after unboxing it and inserting it to the c7000 enclosure.

[RbBsmn]

I will have to check for that. Will try to do that in the weekend.

[Server-Support]

Hi mate,

is there any update for the article that you wrote over the weekend ?