I can not connect to iLo

[Uriel Salazar]

Hello,, well I a new user of enclosure's c7000, I connect to OA fine, but when I try to connect to iLo blades, I have a problems.I not sure if i need do sometime else, Only have the internet page with this error " the page can not be download",,, thancks for any comment...

[JKytsi · Accepted solution]

Have You assigned IP addresses to ILOs ? From OA first time setup wizard maybe.

[marcus1234]

try ping ilo any response

ensure you use explorer 6 or 7 not 8

now what happens

[Uriel Salazar]

Finally I can connect to the iLo, but I have a dude.
I need put my OAs on one subnet and assign EBIPA IPs to other subnet for my blades'
example,,

Setup:
c7000 chassis
OA 10.1.1.15
16 Diferent blades, assign 10.1.4.50 to 10.1.4.66 diferent subnet
1 GbE2c (not the issue)

This it's ok,, or I could have problem with this configuration in the future.

[marcus1234]

OA and ilo need to be on same subnet As all ilo connections actually go via the onboard admin


:)

[Uriel Salazar]

I forgot to comment something,, I was connect the OA to my GbE2c,, and GbE2c connect to my infraestructure,, I suppose this help me to manage to subnet,, because my switch can control this or it's right?? the problem it's I need the OA in one subnet and my blades in other I don't have a option in this

[The Brit]

Uriel,
You MUST have the OA, the blade iLO's and all interconnect modules on the same subnet. If you want the OA to talk to the iLO's and IC modules, you DO NOT have a choice. It MUST be this way.

The important point here is

> the OA must be able to communicate with the iLO's and IC Bays.

This can only happen if they are on the same sub-net.

Dave.