BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

i have a quiestion for bl20p G3...about nics

 
Highlighted
Occasional Advisor

i have a quiestion for bl20p G3...about nics

When are the 4 nics enmbedded for the proliant bl20p g3?
are they in the system board? or
are they in the standard nic mezzanine card?
i have a problem with the "nic number 4" i pinging to him and not response, only in that server ...
any document for see that...

thanks to all...
chris...
4 REPLIES 4
Highlighted
Honored Contributor

Re: i have a quiestion for bl20p G3...about nics

Highlighted
Occasional Advisor

Re: i have a quiestion for bl20p G3...about nics

ok, i see , but my question is embedded in systemboard or in the nic mezzanine card?

or the mazzanine card only abilities the nics, embedded in sB?

thanks for answer me¡¡¡
Highlighted
New Member

Re: i have a quiestion for bl20p G3...about nics

Hi,
4 LAN port is embedded (plus iLO), but only with enhanced enclosure. With older enclosure only 3 LAN port (plus iLO). Mezzanine card pro p-class was only FC HBA.

michalj
Highlighted
Honored Contributor

Re: i have a quiestion for bl20p G3...about nics

technically speaking, 2 of the 'embedded' NICs are on the BL20pG3 system board and 2 reside on a daughter card...

using the HPECM tool will help you determine where NIC 4 (is that LAC 4?) connects to the switch port or patch panel port:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=MTX-710c627f8c39430fb47431ac8b&jumpid=reg_R1002_USEN