iLO2 v2.06 .scexe file?

[Bob Firek]

Is there a .scexe file out for iLO2 version 2.06 that can be used to update the iLO software through the Smart Update Firmware DVD? I can only seem to find the .bin file. Has HP stopped supporting iLO updates through the firmware DVD?

Thanks,

Bob

[Jimmy Vance · Accepted solution]

This link takes you to the download page.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swLang=8&mode=2&taskId=135&swItem=MTX-d2fd80ba5cc64f93834ca32242

The "obrtain software" link appears to be down at the moment, but it should list the .scexe file

[Torsten.]

The pages are not always well sorted, but the file is there ... ;-)

[Bob Firek]

Jimmy,

Thank you very much for the link. This is exectly the file that I'm looking for. Not sure why I wasn't able to find it. I must be blind or getting old...actually I beleive it it both.

Thanks again.

[Bob Firek]

Torsten,

I'm sure you are right. I guess I just didn't drill down enough. Jimmy posted the link that took me to the file but thanks for the post and validating that the file existed somewhere.

[Torsten.]

"Somewhere" - that's right!

Usually I select a current Linux version on the OS selecting pages - this gives you the scexe files too.

Take care, the language of the drivers/firmware are sometimes pre-selected to a local language - switch it back to english!!!