Is Embedded Event Manager (EEM) supported at Cisco 3020 blade switch?

[chuckk281]

Peng had a Cisco 3020 blade switch question:

****************

Does anybody know whether Embedded Event Manager be supported at Cisco 3020 switch?

I find two documents for this switch but description on this functionality is different with each other.

1.Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide, 12.2(55)SE

    http://www.cisco.com/en/US/docs/switches/blades/3020/software/release/12.2_55_se/configuration/guide/sweem.html

    **this functionality is mentioned

2. Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide, Cisco IOS Release 12.2(25)SEF

    http://www.cisco.com/en/US/docs/switches/blades/3020/software/release/12.2_25_sef1/configuration/guide/3020SCG.pdf

    **this functionality is not mentioned.

**************

Input from Hiro:

*******************

Please see Release Notes.

Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(55)SE and Later.

http://www.cisco.com/en/US/docs/switches/blades/3020/software/release/12.2_55_se/release/notes/OL22861.html#wp979628

• Support for Embedded Event Manager (EEM) for device and system management to monitor key system events and then act on them.

*****************

Any other comments or suggestions?

[kanchisharma]

Hi,

Please click on this link  Release Note to read the latest Release Note Version Dated (23/Dec/2011)

According to which EEM is supported.

Thanks.

Was the post useful? Click on the white KUDOS! Star.

For HP Guided Troubleshooting

[kanchisharma]

Cisco IOS Software Releases 12.2 SE Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(58)SE1

is what is listed in above post by me.

Goodluck