LTO3 Tape Library, c7000 enclosure and bl860c blades

[The Brit]

Does anyone know of a reason why I would not be able to see my LTO3 tape library from my BL860c blades. My SAN administrator tells me that they are properly presented to the WWIDs on my HBA's.

I have not had any issues seeing SAN Disks, only problem is with the Tape Library.

My blades are running OpenVMS 8.3-1H1. I was able to present the same library to a rackmounted rx3600 running OpenVMS V8.3 without any problem.

Is it possibly anything to do with NPIV?

Any thoughts would be welcome.

Dave.

[The Brit]

OK. Resolved it.

I had to run the "IO FIND_WWID" command from within the SYSMAN utility, followed by "IO AUTO"

Dave

[The Brit]

See above