Network Weirdness with BL3000 Chassis ILO and GbE2c ports

[Mike Elliott_1]

I have a blade chassis with an ilo port in our network.  I also have 2 GbE2c switches installed.  Those switches are uplinked to our Cisco Core switches 

I get mac flapping on our cisco's with one of the ports of the GbE2c and the ILO port of the Blade... 

%SW_MATM-4-MACFLAP_NOTIF: Host 0022.007f.a700 in vlan 1 is flapping between port Gi1/0/35 and port Gi2/0/47 (35 is a port of the switch, and 47 is the ILO)

Can anyone shed some light on this?

[S_Logan]

Hi Mike,

Check this post, may be useful:

http://www.sadikhov.com/forum/index.php?/topic/179374-cisco-stp-protocol-on-c2960-c2960g-and-c3560/

HTH

Surendar

[S_Logan]

Please check this also:

http://www.sadikhov.com/forum/index.php?/topic/169981-host-xx-xx-xx-in-vlan-x-flapping-between-port-gigx-and-gigx/

HTH

Surendar