Proliant BL460c doesn't power up

[JKytsi]

I have updated OA to 1.20 and ILo to 1.26, removed blade from bay and re-inserted to another bay and another chassis --> blade does not power up

[Oleg Koroz]

LED status ?
IML log ?
Console message ?
Memory ?
other parts swap from good working

[JKytsi]

LED stays amber no matter what You do.
Nothing on IML (exept blade position change notification). Console stays grey and says that server is powered down. And OA LCD panel says that blade is ok.

[Oleg Koroz]

Would it change statement at console from server powered down to anything else if you press and hold power button for 8 sec and release

[JKytsi]

No effect whatsoever with that .

[Oleg Koroz]

had you reseat NIC and FCA if used, pull FCA, can you swap NIC from other server , if no go run over process with system board replacement

[Hannu Tirkkonen_1]

Does the blade complain about too high temperatures?

For some reason we did have a similar case. The blade was complaining about too high temperatures and could not boot. The server did boot after resetting (removal and re inserting) the first nic switch.

[JKytsi]

Hi,
Nothing in logs, and the funny thing is that OA thinks that server has power on.

[Van den Broeck Tijl]

Same issue here.
AO 1.20 and ilo 1.26. Server doesn't power up. Health LED goes red, rack booms up (cooling@maximum) and iLO doesn't show errors.
It thinks the server is running perfectly. Weird thing is though, if you query temperature information and such: everything remains at 0° C. Maybe some kind of "ilo"-link lost or such

[JKytsi]

Well ...problem solved. I changed the mainboard, it's the easy way out =)