Reported abnormally low power requirement

[Aaron.S]

One of my cclass enclosures in particular has started reporting quite a few messages about the enclosure has detected that the blade reported an abnormally low power requirement.

This is further befuddling as there is no records in HP or the onboard administrator about any such messages.

(as a side note, my blades alternate from 'reachable' to 'unreachable' every three days or so)

[Pawan Rawat_1]

Hi
I am also facing same problem

Thanks
Pawan

[h0tspur]

Same here. Any news on this?

[Adrian Clint]

You probably need to update the iLO to 1.78 and the Power Control firmware to 3.4B.
See the firmware section of the drivers/firmware downloads for you blade.

[h0tspur]

Ok, thanks. I just did that on another blade server. I will test this