BladeSystem - General
1748109 Members
4005 Online
108758 Solutions
New Discussion юеВ

Re: simple question about HP 10Gb Ethernet BL-c Switch

 
SOLVED
Go to solution
mujzeptu
Super Advisor

simple question about HP 10Gb Ethernet BL-c Switch

Simple question about HP 10Gb Ethernet BL-c Switch.

Do I have to have two per enclosure or not?
2 REPLIES 2
Adrian Clint
Honored Contributor
Solution

Re: simple question about HP 10Gb Ethernet BL-c Switch

Such a simple question and such a simple answer. But lots of questions from this.
Simple answer = No

But.
Are you wanting redundant 10Gb Connections?
This is only supported with the NC512m 10Gb NIC.
Not supported on all blades (BL49x no support)
Only supported in some interconnect slots. 5/6 and 7/8 on a c7000
mujzeptu
Super Advisor

Re: simple question about HP 10Gb Ethernet BL-c Switch

Do they not work with the 490c g6s?

I do not need redundancy just wanting to have it for internal communication between 5 enclosures.