The Fibre Channel Controller in Slot 1 has a new status of 6.

[Terry Hutchings]

The come in the psp and are available separately.

Link to the agents:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3454575&prodNameId=3562405&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-27fa96e466cc46b1b6e3af1d5d

System management homepage:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3454575&prodNameId=3562405&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-84b4161b7cd3455fb34ac57586

[Tharmarajah Kesavan]

Can I reinstall these agents on top of the existing ones :-O

cheers
rajah

[kris rombauts]

Rajah,

yes you can install the newer insight management agents on top of the current one, no problem to upgrade this way.

Could you relate the date&time of the error on the fibre channel card to other events in the SAN or network ? i.e. another server who reboots.

Are there other servers/blades that also show this error and if so, do they show it around the same date&time ?

It can be that another device (server/switch etc etc) restarts and causes an short SAN reset or timeout issue between the storage array and server/blade.

Kris

[Tharmarajah Kesavan]

Dear ALL,

Thanks for the feedback and suggestions. Well, I have investigated this issue thoroughly and found the affected server is in DMZ and SAN is not attached. I'm going to disable the HBA card in device manager so there's no more alert.