BladeSystem - General
1748275 Members
4023 Online
108761 Solutions
New Discussion

Re: Trying to find End of Life information...

 
Kevster
Occasional Visitor

Trying to find End of Life information...

I recently inherited responsibility for some aging C7000 enclosures, BL480C G1 blades and an EVA600. Trying to prepare a budget to start replacing some of this old equipment. Looking for documentation on "End of Life" for these products to include in my business case. Been searching and haven't found anything useful. Any recommendations?

1 REPLY 1
Robert_Jewell
Honored Contributor

Re: Trying to find End of Life information...

This works for many HP products....

 

Go to the following site:

http://h18000.www1.hp.com/products/quickspecs/productbulletin.html

 

Find your product and open either the HTML or PDF format.  Look at the bottom and if you see something like:

 

Retired on July 31, 2009

 

Then that is the "End of Life" date.   End of Service Life tends to be 5 years following that date, but this is not a hardfast rule.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!