Unable to read server adapter configuration data from the Onboard Administrator (OA).

[anonym_1234]

Hallo zusammen, 

wir haben seit geraumer Zeit das Problem, das im Oneview angezeigt wird das es keine Verbindung zum OA aufgebaut werden kann. 
Die vorgeschlagene Lösung behebt das Problem nicht. 

Unable to read server adapter configuration data from the Onboard Administrator (OA)

Resolution

 Verify network connectivity from the appliance to the OA and refresh the server hardware. If the problem continues to occur, power-cycle the server hardware (allowing it to complete its power on self test) and then refresh again.

Gibt es eine Möglichkeit genauer zu sehen wo das Problem liegt? Logs usw.? 

Viele Grüße und Vielen Dank im Voraus. 

Google Translated: 

Unable to read server adapter configuration data from the Onboard Administrator (OA).
Hi everyone,

We have had the problem for some time now that Oneview shows that no connection to the OA can be established.
The suggested solution does not solve the problem.

Unable to read server adapter configuration data from the Onboard Administrator (OA)

Resolution

Verify network connectivity from the appliance to the OA and refresh the server hardware. If the problem continues to occur, power-cycle the server hardware (allowing it to complete its power on self test) and then refresh again.

Is there a way to see more precisely where the problem lies? Logs, etc.?

Best regards and many thanks in advance.

[Suvamay]

Are you managing the server from oneview?

Check in the oneview activity and alert see the details .

If this is only displaying for one particular server then please check the IML log.

[anonym_1234]

@Suvamay 

Es ist auf mehr als einem Host im Ecnlosure. 
Das IML Log im ILO zeigt keinen Fehler an, nur im Oneview gibt es diesen Fehler. 

Google Translated: 

It is on more than one host in the environment.
The IML log in the ILO does not show any error, only in Oneview is there this error.

[Suvamay]

Please let us know which N/W adpter has been installed in the server.
Is the issue observed after upgrading the OV?