Upgrade the VC 1/10 modules to VC Flex 10.

[jd7000]

Hi,

I need to upgrade the VC 1/10 modules to VC Flex 10.

The enclosure is a C7000 with a VC 1/10 in Bay 1, 2 and Bay 5, 6.

Bay 3 and 4 have FC modules in.

The blades are BL460c's.

Is this quite straight forward?

Thanks,

[The Brit]

John,

An earlier thread gave a procedure which, in retrospect proved to have failed. Check this thread for discussion.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1435511

Dave.

[The Brit]

John,
The scripting is relatively straight forward, refer to the VC CLI user guide.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01881078/c01881078.pdf

or, complain to HP that the documented procedure doesnt work, and you might be able to get them to generate the scripts for you based on a saved configuration file.

Note the most recent version of the upgrade procedure (Jun 2010) is still incorrect.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01732252/c01732252.pdf

HTH

Sorry it couldnt be more helpful.

Dave.