BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

VC Flex-10 to Cisco 4849


VC Flex-10 to Cisco 4849

Is it possible to give me an advice on my condiguration. I want to make the following connection:
1. VC Flex-10 using HP BladeSystem 10Gb SR SFP+
2. Cable: Multimode OM1 62.5/125 micron 160MHz
3. Cisco 10GBASE X2 module

Is this configuration will be functioning. I have some doubt about the optic cable, becuase i can't find if the HP 10Gb SR SFP+ is supporting OM1.

Thank you very much in advance.

Best regards,