BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: BL460C Gen9 - SAN Boot

 
Highlighted
Occasional Contributor

BL460C Gen9 - SAN Boot

We have been issues with BL460C Gen9 servers where after a reboot the server loses it's SAN boot LUNS and as a result we can't bring up the OS.

The work around is to reassign and assign back the server profile and also change the Boot Order sequence to make the FC as the fist itme in the boot order list, as this entry for some reason puts the RAID controller as the first boot device.

Has anyone run into this issue and if so what was your resolution.

 

Thanks

 

 

 

 

1 REPLY 1
Highlighted
Honored Contributor

Re: BL460C Gen9 - SAN Boot

You might try resetting the system to factory defaults just to clear out any oddities

No support by private messages. Please ask the forum!