NIC rename after forced firmware (2019.12.0) upgrade on BL460c Gen10

[jdkarpin]

Hi,
After forced upgrade from 2019.03.0 to 2019.12.0 "HP FlexFabric 20Gb 2-port 650FLB Adapter" got renamed to "HPE FlexFabric 20Gb 2-port 650FLB Adapter". 
Firmware version doesn't change - 12.0.1216.0.

This confuses HPOneView since HW is defined by Model + Network card.
Alert make sense, since HP != HPE.
Workaround is to downgrade Gen10 to 2019.03.0 with force, upgrade ILO5 to 2.14 and upgrade to 2019.12.0. 
Forced upgrade to 2019.12.0 will replicate the issue. 

Generated alert "A problem occurred while retrieving the server configuration data from the Onboard Administrator."

Resolution

Power the server off and back on. Alternatively, verify that all components listed in the logical enclosure's firmware view are at the same supported baseline.

[AmRa]

Hi

Please follow the below action to fix the reported issue.

1. Download and update iLO firmware from below link.
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_a9cfde8ba427435488d972d68f#tab1

2. After the iLO 5 firmware is updated, re-seat the server or perform eFUSE server (Virtually /remotely re-seat the server)  reset to complete the iLO 5 firmware update.
To eFUSE server reset the server blade, perform the following:

1. SSH to OA
2.. Enter below command. (X is server bay number.) > reset server X
3. Type 'YES' when confirmation popup.
4. The server will reboot several times during the Power-On Self-Test (POST) to reapply VC settings.
For more information please refer customer advisory.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00094818en_us