BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

reconfiguring IP address for BL870c server - virtual connect change needed?

 
Highlighted
Advisor

reconfiguring IP address for BL870c server - virtual connect change needed?

Hello.  I am running HPUX 11.31 on a BL870c server in a c7000 enclosure.  I am trying to change the IP address on my lan3 config which has been connected to our backup network. We are moving it to a new backup network with a competely different IP.   I changed the IP for lan3 thru smh and used the subnet mask and broadcast IP's provided and verified.  I cannot ping this new IP from any server other server.  I tried to add a static route at the advice of a network admin, but it tells me the the network is unreachable.  I was told there may be a change that needs to be made to the virtual connect, but i only have command line access to it at this time and cannot find anything that might need to be changed..  Any advice or help would be greatly appreciated.  thanks

 

1 REPLY 1
Highlighted
HPE Pro

Re: reconfiguring IP address for BL870c server - virtual connect change needed?

Hello,

The lan3 connected network (uplink of the VC) also should connect to the same (new) network.
In VC side, Only Network(name) might have mentioned.

Check with the network team to verify the upstream switch configuration.


I am an HPE employee

Accept or Kudo