BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Tranceiver P/N 455885-001 support HP VC FlexFabric 10Gb/24-Port Module ?

 
Highlighted
Occasional Visitor

Tranceiver P/N 455885-001 support HP VC FlexFabric 10Gb/24-Port Module ?

Hi everybody,

I had C7000 enclosure system, with 2 HP VC FlexFabric 10Gb/24-Port Module (not module ethernet 10Gbs )

Now i need 2 module tranceivers 10GBs, so I buy 2 HP tranceivers P/N 455885-001

But i insert them to bay 1 X3, and bay 2 X3 of HP VC FlexFabric 10Gb/24-Port Module , configure SUS, Network vlan....

but SUS not active, stil standby.

I try show traffic on 2 port X3, it is not show tx traffic, eq =0, but link is linked

And show traffic on Cisco Switch (connect to this port X3)

Are 2 Tranceiver P/N 455885-001 not support HP VC FlexFabric 10Gb/24-Port Module ?

Anybody have same this case ?

 

1 REPLY 1
Highlighted
HPE Pro

Re: Tranceiver P/N 455885-001 support HP VC FlexFabric 10Gb/24-Port Module ?

hi, 

Query is not clear, did you created profiles and add the new created SUS , if you create new SUS with the uplinks it will be in standby mode untill you add & assign in at least in one profile. 

 

if profile is added and still u see uplinks in standby log a ticket with VC show all * and with support dump with HPE support team. 

 

regards

 


I am a HPE Employee