VC Flex 10/10d installed transcievers

[PanoramixTX]

Not sure this is the right forum. If not I do appologize. I will appreciate any help, directing me to the right location, or with the issue itself.

Working with c7000 enclosures. Loaded with 2 vc flex modules. I try to generate a printout that includes the installed transceivers, preferably incl port, serial numbers, type. I try to generate BEFORE importing the enclosure information in the VC manager. Tried via OAM, via the VC web manager, via a putty ssh session, and via the VCSU. Latests gives me most hope, because it accepts some instructions without the prior import. But still no joy.

Any help is highly appreciated

P.S. This thread has been moved from HP Insight Cluster Management Utility (CMU) to HP BladeSystem Virtual Connect. - Hp Forum moderator

[Robert_Jewell]

I am not sure you can get that level of detail with the SFP's.  The VCM CLI command "show uplinkport *" seems to provide the most data.  A couple of examples:

--------------------------------------------
ID : enc0:2:X2
Enclosure : C7k_Enc00
Status : Linked (Standby) (1Gb/Full)
Type : SFP-RJ45 (external)
Speed : Auto/Auto
Used By : .220_net
Label : X2
PID LED State : green
LAG ID : -- --
Connected From : -- --
Connected To : -- --
--------------------------------------------

--------------------------------------------
ID : enc0:3:1
Enclosure : C7k_Enc00
Status : Logged In (8Gb)
Type : -- --
Speed : Auto
Used By : SAN_Sun2540_A
Label : 1
PID LED State : -- --
LAG ID : -- --
Connected From : 20:11:00:11:0A:00:87:01
Connected To : 10:00:00:C0:DD:30:68:8A

-Bob