Virtual Connect Login Fails

[KIngstone]

Hi All, I have two virtual connects that were previously login in OK, but suprisingly I'm now unable to log into both of them with their default passwords. The VCM fails at "Loading...." and I then loose the VCM page.

I've tried using CLI, but the CLI says incorrect password despite being the default ones present on the stickers attached to them. I'm certain they were never changed.

My the VCs be failing to load some login service? All my blades have currently lost network, and I need to bring them back up.

[SanjeevGoyal]

Hello,

I would request you follow the below documents to fix this issue.

HP Virtual Connect Manager - Unable to Login

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c01859164

Advisory: HPE Virtual Connect - Unable to Log Into Virtual Connect Manager (VCM) Using LDAP Authentication After Updating c-Class Virtual Connect Firmware to Version 4.75

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00075901en_us

I would request contact HPE for further assistance if the issue still persists.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,