BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

virtula connect c7000

 
Highlighted
New Member

virtula connect c7000

HI
 
We have two virtual connect f8  modules  on  c7000 enclosure   that contain    virtual connect domain . the  vc modules are on  interconnect bays 1 and 2.
Because we need more network cards  for the blade  servers we need to add two more f8 modules in bays 3 and  4.
My question is how to add the new modules to the existing domain.
Are they added automatically to vc domain or  we need to add them first in the hardware section
The second question is can we directly  connect  virtual connect  uplinks from two c70000 enclosures that have different vc domains . I mean no Ethernet switches exist in the middle

1 REPLY 1
Highlighted
HPE Pro

Re: virtula connect c7000

Hi Afif

The following doc might help you add the VC mdoule to existing domain.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c01900011

 

Thank you

KB


Accept or Kudo