login password

[Ayman Altounji]

Can anyone tell me how to reset a ws3322 switch. I do not Know the login password. It has the ports set to 10mbps. I need to reset them to auto.

[Ayman Altounji]

If "public" or no password does not let you into Read/Write mode.
Post the MAC address of the switches and I will help you solve your issue.

The MAC address is on a white label on the outside of the switch.
12 Digit Hexadecimal.

mark-

[Ayman Altounji]

Mark
ON THE LABEL: net. add. 0008C7-D62760 sn 1P88CCF1S037
Thanks, I have been away on business.
Nathan

[Ayman Altounji]

Try this and let me know.
7064512c

mark-

[Ayman Altounji]

Mark
this looks good, reply is: enter new password. if it is reseting I would like to not have a password, and to clear all settings and address, and run in auto 10/100 mode.
nathan

[Ayman Altounji]

Once you get to read/write mode.
Go to the System Configuration menu and set password to "none"
If you then get back to the main menu you can "Return to default configuration"
This will set the ports back to "Auto" Detect Speed/Duplex.

[Ayman Altounji]

Thanks!
Nathan

[Ayman Altounji]

Good answer - thanks Nathan