HPE Community
Communications and Wireless
1833779 Members
2188 Online
110063 Solutions
New Discussion

Wireless Lan with WL410 and WL210 not responding for netbios neighborough

 
Magnon Daniel
New Member

‎08-28-2003 01:46 AM

‎08-28-2003 01:46 AM

Wireless Lan with WL410 and WL210 not responding for netbios neighborough

i have one WL410 access Point configure as access point and all default setting
i have 3 pc's with WL210 card and lan is OK

but when i open network neiborough, no pc appear but this on which i am logged.

if i search other pc's, sometime it is found, not regularly.
the ping for all the pc's is OK

question: does the WL410 filter the netbios broadcast by default ?
if yes, where may i open the netbios broadcast ?
0 Kudos
1 REPLY 1
Jerome Henry
Honored Contributor

‎08-28-2003 07:17 AM

‎08-28-2003 07:17 AM

Re: Wireless Lan with WL410 and WL210 not responding for netbios neighborough

Hi,

Normally the wl410 transmits all, included netbios messages.

What are your OS ? The fact that sometimes PC are found, sometimes not indicates more a reception problem than an access point one.

When you do 'start/run/other_PC_IP' do you get through 100 % time ?

J
You can lean only on what resists you...
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.