@HPE Data Center Expert: HPE 5950: interface Vsi-interface, arp route-direct advertise => IPv

[MichaelM55]

Hello,

I configured EVPN and setup interface vsi-interface. For advertising IPv4 host routes there is "arp route-direct advertise", i.e.:

 ip binding vpn-instance vpninstance1
 ip address 10.77.0.1 255.255.255..0
 arp route-direct advertise
 distributed-gateway local

Currently there is no support for IPv6, i.e. no ~"nd route-direct advertise". It would be great if you could ask your colleagues at R&D whether this feature is planned.

Any other solution would be great. Currently I started a python script, i.e. ping IPv6 address, reading IPv6 entries from nd neighbor table, create a static /128 route out of it and when the entry disappears delete the static route, but this doesn´t scale well...

Sidenote: Is it possible to take part in a kinde of beta program for Comware based switches?

Regards

[MichaelM55]

So let´s push that one for Data Center Networking Expert Day

[network_king]

This is an enhanacenet request. please riase a CRC request through normal Sales channels

[bala5]

Hi,

As of now there is no plan, however suggesting you to raise enhancement request to add thsi feature either via HPE Pre-sales ot Partner to get it add in next code release.