Restore to factory default configuration option missing hp 6125 G/XG switch

[peyrache]

What is result of
Display default-configuration
Display saved
Display running
Display startup
Looks same ?

[LuckyTyagi]

display current-configuration is a big output but not as much as it used to. As i deleted the config file and all the vlan, pvid that were present got erased so seems like new, but it isn't. Attaching outputs [not the complete output of display current-configuration and display running isn't a command]:

<6125G/XG Blade Switch>display current-configuration
#
version 5.20.99, Release 2103
#
sysname 6125G/XG Blade Switch
#
irf mac-address persistent timer
irf auto-update enable
undo irf link-delay
#
domain default enable system
#
vlan 1
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
user-group system
group-attribute allow-guest
#
local-user admin
password cipher $c$3$Z2SLFwXAT85E0/95xqzSD0ANJeXfOCc0
authorization-attribute level 3
service-type web
#
interface NULL0
#
interface GigabitEthernet1/0/1
port link-type hybrid
port hybrid vlan 1 untagged
#
interface GigabitEthernet1/0/2
#
interface GigabitEthernet1/0/3
#
interface GigabitEthernet1/0/4
#
interface GigabitEthernet1/0/5

.......................................

#
interface GigabitEthernet1/1/5
port link-type hybrid
port hybrid vlan 1 untagged
#
interface GigabitEthernet1/1/6
#
interface GigabitEthernet1/1/7
#
interface GigabitEthernet1/1/8

..................................

<6125G/XG Blade Switch>display startup
MainBoard:
Current startup saved-configuration file: NULL
Next main startup saved-configuration file: flash:/config.cfg (This file does not exist.)
Next backup startup saved-configuration file: NULL
<6125G/XG Blade Switch>display saved-configuration
The config file does not exist!
<6125G/XG Blade Switch>

[peyrache]

Display default ?
Also dir: result ?

[sdide]

Hi,

How does the "display current", differ from "display default"?

The display current you posted looks pretty default to me (except for the user configuration).

I don't know if the blade-center chassis itself does some - "funny stuff" with the switch configuration.

Regards

[LuckyTyagi]

<6125G/XG Blade Switch>display default
^
% Unrecognized command found at '^' position.
<6125G/XG Blade Switch>dir
Directory of flash:/

0 -rw- 132 Apr 26 2000 12:00:26 patchstate
1 -rw- 16053376 Jun 05 2012 10:14:37 6125-cmw520-r2103.bin

260736 KB total (243608 KB free)

<6125G/XG Blade Switch>

[peyrache]

May be now must think to update firmware version
Seems pretty old
JY

[sdide]

Hi,

I think we need somone from HP to explain whats going on here.

As far as I can see, you're running R2103. According to the manual

HP 6125G & 6125G/XG Blade Switches Fundamentals Command Reference for Software version: Release 2103 and later page 114, "display default-configuration" is a supported command.

Anyways:

Have you tried disabling the "password recovery" feature?

] undo password-recovery enable

According to the manual, the option number 5 "<5> Restore to Factory Default Configuration" should appear in the Extended Bootware menu if you use the above command in the CLI (and reboot). However according to the manual this command is available from R2105 and later.

So I guess you really need to upgrade.

Regards

[hp6125g]

hi 

i tryed to reset from manu 

Enter your choice(0-9): 5
Password recovery capability is enabled. To perform this operation, first
disable the password recovery capability using the undo password-recovery
enable command in CLI.

the problem i can't login to CLI