HPE Community
Disk Enclosures
1752617 Members
4672 Online
108788 Solutions
New Discussion юеВ

Convert vdisks Redundancy level from vraid1 to vraid5 on HP EVA 6000

 
SOLVED
Go to solution
Jayaprakash Subramanian
Frequent Advisor

тАО05-22-2010 11:07 AM

тАО05-22-2010 11:07 AM

Convert vdisks Redundancy level from vraid1 to vraid5 on HP EVA 6000

Hello All,

We have a setup with EVA6000 17TB of storage. Initially all the disks are configured with the redundancy level of the vdisks to vraid1. We need to convert the vdisk redundancy level to vraid5. Is there any way to convert the redundancy level from 1 to 5 without affecting the disks. Please Advise.

Thanks,
Jayaprakash S
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО05-22-2010 12:44 PM

тАО05-22-2010 12:44 PM

Solution

Re: Convert vdisks Redundancy level from vraid1 to vraid5 on HP EVA 6000

From CV user manual:

"...Once a virtual disk is created, its Vraid type cannot be changed."

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
Patrick Terlisten
Honored Contributor

тАО05-23-2010 04:21 AM

тАО05-23-2010 04:21 AM

Re: Convert vdisks Redundancy level from vraid1 to vraid5 on HP EVA 6000

Hello,

if you have a business copy license you can create clone with another VRAID level.

Regards,
Patrick
Best regards,
Patrick
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.