D2600 SAS AJ940A with 3TB drives only showing up as 2199

[DBurgoyne]

All of my firmware and drivers are updated on this system, but my 3TB drives are only showing as 2199GB in the ACU, it's attached to a Smart Array P411 card. No errors, just misreporting the drive size....

Any advice?

[Johan Guldmyr]

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02910174&lang=en&cc=us&taskId=125&prodSeriesId=3886974&prodTypeId=329290

"HP Smart Array Controller Firmware Version 5.06 is the minimum firmware version required to support 3TB or larger HP SAS/SATA hard drives attached to an HP Smart Array P212, P410/P410i, P411, or P812 Controller."

[DBurgoyne]

Yep, like I mentioned all of the firmwares are up to date... 

P411 

Firmware Version

6.00

Enclosure

Firmware Version

0147

[Johan Guldmyr]

Old ACU version then?