EVA4400 access by hp ux

[yazidhani]

i want know how access eva4400 direct from hp ux 11iv3 ; i have storage server windows for access eva44000 ; but i want access direct .

[marsh_1]

hi,

you can direct attach it to a server if you want , although it is usual to access it via a fibre channel switch so the array can be shared by multiple servers. see diagrams in the install guide.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01680587/c01680587.pdf

hth

[IBaltay]

Hi,
maybe this could help you:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00310436/c00310436.pdf?jumpid=reg_R1002_USEN


http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01680588/c01680588.pdf?jumpid=reg_R1002_USEN

[Víctor Cespón]

Take this into account:

4 Gb Emulex PCI-e HBAs are not supported on the EVA4400 or EVA6400/8400 (direct connect or SAN support). The affected 4 Gb Emulex PCI-e HBAs are AD299A, AD355A, AD221A, AD222A, and AD393A. The affected HP-UX versions are 11.23 IA64 and 11.31 IA64.

[Steven Clementi]

Also, unless you are running the latest XCS and ABM firmware, you need the Windows Server in order to configure your storage array.

Steven