Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

 
Highlighted
Frequent Advisor

how to connect my controller HSV 200A to my bay (P/N AD542B)

I have two controlers HSV 200 A (P/N AD525B)
And two bay P/N AD542B. So I need to install the two bay in mirror. My server is HP integrity rx6600.
I need any docs to connect the controler with the bay first and the controller with the san.
KUZO
11 REPLIES 11
Highlighted
Honored Contributor

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

Hi,
it should be the HP StorageWorks EVA4000/6000-A Controller Pair

and
2 pieces of
HP StorageWorks M5314B FC Drive Enclosure

Here are EVA6000 supported configurations:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00365588&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN

the pain is one part of the reality
Highlighted
Frequent Advisor

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

I do the connexion now how to create luns on my baie?
How can I use graphic interface?
The server is rx6600

KUZO
Highlighted
Honored Contributor

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

Hi,
this gives u needed info on what platform u can install the Command View EVA management server. From here you can initialize the EVA, create the disk groups, hosts and logical volumes (vdisks):
http://h18006.www1.hp.com/products/quickspecs/12239_div/12239_div.html
the pain is one part of the reality
Highlighted
Frequent Advisor

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

I have problem with hba driver. the product number of the hba cards is A7387A.
The operating system of the hp storage server is windows 2003 server.
Thank you for any helps
KUZO
Highlighted
Honored Contributor

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

Hello,

you need a x86 server to install Command View EVA. See the documentation for supported windows versions. Your EVA modell can only be managed by Command View EVA.

Best regards,
Patrick
Best regards,
Patrick
Highlighted
Frequent Advisor

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

Thank you,
I create the disk groups, hosts and logical volumes (vdisks)on the HP Storage System. And I declare the IP adress of my host HPUX system.
But on my hpux host, ioscan thas not give me any hardware path on hpux.
so I can not see the vdisks on the server.
I saw only the controlers.
KUZO
Highlighted
Honored Contributor

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

Hi,

Are any errors shown within Command View EVA ? If the cache batteries have failed, then you will not see any Vdisks on any hosts.

Cheers,

Rob
Highlighted
Honored Contributor

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

Also, did you actually present the vdisks to the hosts ?

Cheers,

Rob
Highlighted
Frequent Advisor

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

hallo,

effectyvely the cash battery faild. There is an orage led on the battery.
May I replace it before use the disk ?
And my second request is how can I present the disk to the host?
thank you
KUZO