Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Mini-sas cable doesn't fit MDS600

 
SOLVED
Go to solution
Highlighted

Mini-sas cable doesn't fit MDS600

I don't know what is wrong, I cannot the connector simply because it doesn't fit.

The 2 screws that overhang make it impossible to introduce it completely.

I'm using original cable (407339-B21).

I borrowed the image from a website, the connector looks the same as mine.

 

 

P.S. This thread has been moevd from General to Disk array. - Hp Forum Moderator

11 REPLIES 11
Highlighted
Honored Contributor

Re: Mini-sas cable doesn't fit MDS600

Where doesn't it fit? Are you connecting it in the right place?
Highlighted

Re: Mini-sas cable doesn't fit MDS600

It's not something you can easily mistake.

Does HP want me to force it?

 

minisas.png

Highlighted
Trusted Contributor

Re: Mini-sas cable doesn't fit MDS600

No SAS cable ships standard with the MDS600. HP recommends using the shortest cables possible. However, the maximum supported cable length that can be used between SAS ports is 2.00 m (6.56 ft).

 

The sas cable that is compatible is mini-SAS 4x 2M Cable All and the model is 407339-B21 .

Please verify.

 

Sudhakar

Highlighted
Trusted Contributor

Re: Mini-sas cable doesn't fit MDS600

Also i have checked the cable here and ut does not have that additinal clip kind of metl that you have in the picture.

Highlighted
Trusted Contributor

Re: Mini-sas cable doesn't fit MDS600

 
Highlighted
Trusted Contributor

Re: Mini-sas cable doesn't fit MDS600

i think you can try remove the additional clip that you ahev on the top which is hampering the complete entry.

 

Highlighted
Solution

Re: Mini-sas cable doesn't fit MDS600

If i remove the screws i also need to remove another piece that gets loose, and the connector gets weak and unable to attack firmly.

 

SOLUTION: I contacted HP Support and they sent me new cables that fit.

Highlighted
Honored Contributor

Re: Mini-sas cable doesn't fit MDS600

Hi! Thanks for getting back with a solution.

Do the new cables have the same part numbers as the ones you got originally?
Highlighted

Re: Mini-sas cable doesn't fit MDS600

Old cables only had this number "407339-B21".
New cables have PN: 407344-033, and Spare PN: 408767-001