P2000 G3 - RS-232 3.5mm jack

[Gary Gunderson]

This device has a 3.5mm jack labled 'CLI' the manual says (pg 19) says that it is an RS-232 CLI port:

CLI port (RS-232; reserved for future use)

So, just how far in the future is this reserved for.
Realistically, is this actually operational and is there a cable that can be purchased to provide access to it?

[MAH_2]

P2000 is the latest model of MSA2000.
In MSA 2000 there is a microDB9 connector for configuring the MSA. For P2000 also same may be there

[Venkadesh Kannan]

Hi,
It is not recommended from HP to use the Serial port for P2000G3. Please use the USB port only for performing any CLI based commands.

[Gary Gunderson]

It would be advantageous to be able to attach this P2000 to a serial KVM. So, my question remains; Is the RS232 CLI 3.5mm jack active on the P2000G3 and, if so, is there a cable available for it?