Disk Enclosures
1748051 Members
5413 Online
108758 Solutions
New Discussion

Re: Update Eva 4400 to New Firmware is take long time

 
DaveDaveCRC
New Member

Update Eva 4400 to New Firmware is take long time

Hi, I have a EVA 4400 HSV300 and this morning update to XCS_10001000_Media_T4256-10046 version.

 

But at Command view Web Interface display:

 

Storage System Updating : Your storage system is in the process of a firmware update, and it is not available for management. While your controllers restart, system properties are also not available.

This process may take up to 10 minutes to complete. You may manage other storage systems while the process completes.

 

But this are take more than 30 minutes with the same message, what is wrong?

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: Update Eva 4400 to New Firmware is take long time

The latest firmware is XCS 11001000

 

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63153

 

 

The update itself takes 1 or 2 minutes, but it takes longer until command view shows the eva again.

 

Your version needs minimum command view 9.4, what version is installed in the ABM module?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!