EVA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA440 and Alphaserver 4100 issue

 
Highlighted
Occasional Collector

EVA440 and Alphaserver 4100 issue

I have an existing Alphaserver 4100 with KGPSA HBAs connected to an EVA4400.  Works fine.

I now have a 2nd Alphaserver 4100 with KGPSA HBAs that I am trying to connect. 

 

I have it added to my zone fabric, the WWID of the HBAs showed up in the EVA4400, so I added it

as a host, type of HP OpenVMS.  Created a few test drives and presented them, and they show up in WWIDMGR.

I set the OS UNIT IDs on all the drives.

 

However, in WWIDMGR, the UDID just shows zero ( 0 )  on all of them.

P00>>>wwidmgr -show wwid
[0] UDID: 0 WWID:01000010:6005-08b4-0006-fef2-0000-d000-0017-0000 (ev:none)
[1] UDID: 0 WWID:01000010:6005-08b4-0006-fef2-0000-d000-0023-0000 (ev:none)
[2] UDID: 0 WWID:01000010:6005-08b4-0006-fef2-0000-d000-001d-0000 (ev:none)
[3] UDID: 0 WWID:01000010:6005-08b4-0006-ff07-0000-b000-021d-0000 (ev:none)
P00>>>

 

 

 

Adding -full to the command shows device not found on all of them.

However, if I go into the EVA and unpresent a drive, I see it disappear from this list

after an INIT.  So I know the alpha is SEEING the drives, but it is just like only partially sees them.

Like something is missing.

 

P00>>>wwidmgr -show wwid -full

kgpsab0.0.0.4.0
- Port: 1000-0000-c92d-cd35   

kgpsab0.0.0.4.0
- Port: 2016-0005-1e04-7db0   

kgpsab0.0.0.4.0
- Port: 21fc-0005-1e04-7db0   

kgpsab0.0.0.4.0
- Port: 5001-4380-013b-f188   

kgpsab0.0.0.4.0
- Port: 5001-4380-013b-f18d   


kgpsaa0.0.0.4.1
- Port: 1000-0000-c925-f34f   


[0] UDID: 0 WWID:01000010:6005-08b4-0006-fef2-0000-d000-0017-0000 (ev:none)
 - current_unit:6915 current_col: 0 default_unit: 6915   
          via adapter       via fc_nport       Con     DID     Lun
 - Device not found.

[1] UDID: 0 WWID:01000010:6005-08b4-0006-fef2-0000-d000-0023-0000 (ev:none)
 - current_unit:21826 current_col: 0 default_unit:21826   
          via adapter       via fc_nport       Con     DID     Lun
 - Device not found.

[2] UDID: 0 WWID:01000010:6005-08b4-0006-fef2-0000-d000-001d-0000 (ev:none)
 - current_unit:6435 current_col: 0 default_unit: 6435   
          via adapter       via fc_nport       Con     DID     Lun
 - Device not found.

[3] UDID: 0 WWID:01000010:6005-08b4-0006-ff07-0000-b000-021d-0000 (ev:none)
 - current_unit:4161 current_col: 0 default_unit: 4161   
          via adapter       via fc_nport       Con     DID     Lun
 - Device not found.

 

Is there something I have just overlooked when setting these up?  I don't think it is an incompatibility issue,

as I have the exact same AS4100 and HBAs working in production.

 

Thanks for any suggestions you can offer.

 

1 REPLY 1
Highlighted

Re: EVA440 and Alphaserver 4100 issue

Hi,

 

can u kindly remove the VDISK and create same and present to the host progoup using "present vlun", by giving lun id apart form 0

 

Regards

Ranjitha

i Work for HP