EVA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA8000 Host Port Data Replication Settings - changing priority

 
Highlighted
Occasional Contributor

EVA8000 Host Port Data Replication Settings - changing priority

Hi,

we got two EVA8000 with CA replicated between eachother. As you can see from the Host Port Data Replication Settings, curretly port 3 on controller B is being used for CA replication. Now, we are having some strange issue with one of the fabrics, and I want to change the replication to one of the other ports, e.g controller B port 2. If I change port priority around for P1 and P2 on contrller B and set P3 to No_DR, what will happend?

 

I've read page 56 in the HP P6000 Continuous Access Implementation Guide, but don't quite understand the oucome. Repliaction will change to P2 on Controller B, or may end up on any other port with pri 1, e.g. A/P3?

 

https://docs.google.com/file/d/0B0-ThoRUIM8GLXJOb09LV3Q1R0k/edit?usp=sharing

 

1 REPLY 1
Highlighted
Valued Contributor

Re: EVA8000 Host Port Data Replication Settings - changing priority

out of curiousity what replication mode/policy are you using?

 

 

I work for HPE.