How to Replace cache Batteries ?

[Digi-I]

We have hp EVA3000 with dual hsv100 controllers.
one of our hsv100 controller is displaying a red LED next to the battery sign.In command view both the battery module status is failed but charger status is Good.So we need to replace the cache batteries of the hsv100 controller.Can you pls give me some step by step instructions abt how to replace cache batteries in hsv100 controller? Thanks in advance.

[AnthonySN]

below link is a guide for cache battery replacement. same for eva3k.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=321347&prodTypeId=12169&prodSeriesId=321347&objectID=c00024681

also go thru below thread.
http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1266158304352+28353475&threadId=1332253

[Basheer_2]

Hello Digi,

This is really easy. Usually HP does.
Just pull out the blinking Battery and replace with the new one.

it usually takes about 24 hours to fully charge.

you can monitor this in the CV.

[Torsten.]

As said in the first answer, the procedure may depend on the firmware version. If unsure, ask the support.

[buffelo]

anyone know how to replace this? seems like the link given above no longer exist. below is the battery pack. please help. thank you.

https://www.amazon.com/HP-Battery-pack-Controller-Enterprise/dp/B008M10LUS

[Mike Texter]

I think the changeover from hp.com to hpe.com screwed up the original link.  Here's an updated one (for EVA5000, but same thing)  http://h20566.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=321347&docId=emr_na-c00024681&lang=en-us&cc=us

[buffelo]

Dear Mike, appreciated.